Hip prusiks are an alternative to mechanical adjuster for adjusting a flipline lanyard. With a micro-pulley, they can be used for one-handed adjustment. Unlike mechanical adjuster, a hip prusik allows the lanyard to be lengthened while under tension. Our hip prusiks measure 28" from eye to eye.
We also stock a wide variety of mechanical flipline adjusters which perform the same task.
28" eye & eye 3/8” Tenex hip prusik spliced on the new ISC Swivel snap for a twist-free adjuster on your flipline lanyard. Appropriate for use on 1/2” and larger flipline lanyards
The non-swivel aluminum snap spliced onto this 3/8” Tenex 28” eye & eye hip prusik provides a shorter, more compact hip prusik for adjusting your flipline lanyard. Appropriate for use on 1/2” and larger flipline lanyards.
This 3/8” Tenex 28” eye & eye prusik has been spliced onto the Rock Exotica SwivaEye auto-locking carabiner with built-in swivel, which makes it excellent for use in a 2-in-1 flipline kit. Appropriate for use on 1/2” and larger flipline lanyards.
3/8” diameter Tenex hip prusik works great on 1/2” or larger lines. 28” Eye-to-eye. Appropriate for use on 1/2” and larger flipline lanyards. Colors may vary.
28” Bigfoot 1/2”diameter sewn eye-to-eye 16-strand hip prusik spliced onto standard aluminum double-locking snap. Appropriate for use on 5/8” and larger flipline lanyards.
28” Bigfoot 1/2”diameter sewn eye-to-eye 16-strand hip prusik. For use with your own carabiner. Appropriate for use on 5/8” and larger flipline lanyards
Made from 3/8” Samson Pro-Master, these 3-strand hip prusiks are durable and affordable. Hand spliced, steel locking snap.
Made from 3/8” Samson Pro-Master, these 3-strand hip prusiks are durable and affordable. Hand spliced, aluminum locking snap.
Made from Yale 1/2" XTC Plus around a steel core for extra safety and durability, with a strong steel clip. These wire-core prusiks had been tough to find, and our Canadian climbers had requested them for years. Yale Cordage stepped up to the plate to manufacture these unique wire-core prusiks which provide the utility of a hip-prusik with the security of the steel cable in side the 16-strand cover.
28” Eye-and-eye hip prusik made from Sterling 8mm prusik cord.
HRC cord has been hand-spliced to make a grippy, heat-resistant prusik to slack tend on a flipline. Simple, one-handed adjustment system.
This kit provides adjustment for 5/8" steel-core lanyards by using the Pinto Rig as a slack-tending pulley. An excellent choice for tending steel-core lanyards one-handedly.
Kit contains: DMM Pinto Rig, Ocean sewn eye-to-eye prusik, Pirate auto-lock carabiner.