Spyderco uses exclusively high-carbon steel to bring you these top cutting tools. WesSpur stocks a selection of Spyderco knives that are suitable for the tasks tree workers may find themselves needing a blade for, including quickly cutting rope, webbing, or belting, should a person need to be freed from a restraint in an emergency. All Spyderco we carry knives are made from the best knife steels, with handles made from light weight, fiberglass-reinforced nylon, and reversible titanium clips so that you can carry your knife on the right or left.
Spyderco's serrated SpyderEdge increases the cutting edge length by up to 24%. Serrations improve edge retention because the tips initiate the cut easing the amount of force required by the recessed edges. The points protect the sharp inside curves that continue the cut, so the curves have less wear over time. The signature SpyderEdge, also referred to as a two-step serration ,incorporates a repeated pattern of one large and two small serrations. Spyderco knives are covered by a manufacturer warranty against defects in materials & workmanship.
Spyderco named this knife after its principal job function, to Assist. Designed for emergency & rescue professionals (and for the well-equipped civilian) who rely on their knives to function flawlessly under pressure. The most amazing function of this knife is its ability to slice quickly through rope up to 3/4” by squeezing the rope between the handle and the blade.
Length Overall 8 3/8” (213 mm) - Blade Length 3 11/16” (94 mm) - Blade steel VG-10 Handle - FRN Length Closed 4 7/8” (124 mm) - Cutting Edge 3 3/16” (81 mm) - Weight 4 oz (115 g)
Cutting during emergencies requires that Save and Serve professionals have a readily accessible knife and are able to quickly and safely cut a person free from binding rope, harnesses, or webbing. Performance, ergonomics, and comfortable use are all key elements needed in a rescue knife, and the Rescue has them all.Length Overall 8 3/16” (209 mm) - Blade Length 3 5/8” (93 mm) - Blade steel VG-10 Handle - FRN Length Closed 4 5/8” (117 mm) - Cutting Edge 3 3/8” (86 mm) - Weight 2.7 oz (75 g)
A modified Rescue made with state of the art non-rusting H1 steel. H1 is a precipitation-hardened steel containing nitrogen instead of carbon, which cannot rust.
Length Overall 8 1/4” (210 mm) - Blade Length 3 11/16” (94 mm) - Blade steel H-1 - Handle - FRN Length Closed 4 5/8” (117 mm) - Cutting Edge 3 3/16” (81 mm) - Weight 2.75 oz (77 g)
Precipitation-hardened steel - rust proof! H1 steel blade Holds edge, internal steel parts treated to be impervious to rust, salt. Plain Edge, reversible left/right clip
Like the claw of the Harpy eagle the C08 is shaped for controlled pulling cuts. The hawkbill blade shape originated in the marine/fishing industry where severing rope, line, webbing and netting is done at arm's length quickly and efficiently. The curving arc holds what you're cutting against the sharpened edge keeping it from slipping off the tip.
Length Overall 6 1/2” (165 mm) - Blade Length 2 3/4” (70 mm) - Blade steel VG-10 Handle - SS Length Closed 3 7/8” (99 mm) - Cutting Edge 1 9/16” (65 mm) - Weight 3.75 oz (106 g)
Engineered for the human hand, the Native's ergonomic design maximizes cutting ability while minimizing discomfort and fatigue. This model is all about combining performance and comfort.
Length Overall 7” (178 mm) - Blade Length 3 1/8” (80 mm) - Blade steel VG-10 Handle - FRN Length Closed 3 15/16” (100 mm) - Cutting Edge 2 5/8” (67 mm) - Weight 2.65 oz (106 g)
Mid-sized for every day cutting. Excellent for hunters, hikers, & outdoorsmen, skeletonized steel liners increasing the handle's rigidity and strength, leaf-shaped, flat ground blade for cutting performance. Walker Linerlock (with jimped liner) and a 4-way pocket clip lets you set your carry and draw preference.