Increased tooth diameter and reduced pocket thickness allow for a 3/4" clearance between the side of the pocket and the stump. This prevents the pocket from rubbing against the stump, which significantly reduces pocket wear and improves overall performance of your stump cutter.
The Wearsharp tooth maintains a sharp edge as the tooth wears in use, for optimum performance.
You have the choice of "green" or "red" cutters. Standard or "Green" teeth have a shallower profile, making them more durable, especially when in rocky soil. The Deep Dish or "Red" teeth have a deeper profile, for a more aggressive cut - not recommended for rocky soils (25% or more rock).
Greenteeth® supplied with nut and spacer. Available as Standard Dish "Green" or Deep Dish “Red” teeth.
500-series: for machines 16hp and smaller. Diameter is just over 1/2”. Sold individually.
500 Series Greenteeth Specifications | Wrench Size (in) | Nut Size (in) | Carbide (in) | Torque (ft. lbs.) |
---|
WARNING: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. The following chemicals have been identified by the State of California to cause cancer. Cobalt CAS ID #: 7440-48-4, Nickel CAS ID #: 7440-02-0.
500-series: for machines 16hp and smaller. Remember to order bolts below. Sold individually.
WARNING: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. The following chemicals have been identified by the State of California to cause cancer. Cobalt CAS ID #: 7440-48-4, Nickel CAS ID #: 7440-02-0.
Greenteeth® supplied with nut and spacer. Available as Standard Dish "Green" or Deep Dish “Red” teeth.
700-series: for machines with 18 to 35hp. 3/4” diameter. Sold individually.
700 Series Greenteeth Specifications | Wrench Size (in) | Nut Size (in) | Carbide (in) | Torque (ft. lbs.) |
|
---|
WARNING: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. The following chemicals have been identified by the State of California to cause cancer. Cobalt CAS ID #: 7440-48-4, Nickel CAS ID #: 7440-02-0.
700-series: for machines with 18 to 35hp. Remember to order bolts below. Sold individually.
WARNING: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. The following chemicals have been identified by the State of California to cause cancer. Cobalt CAS ID #: 7440-48-4, Nickel CAS ID #: 7440-02-0.
Greenteeth® supplied with nut and spacer. Available as Standard Dish "Green" or Deep Dish “Red” teeth.
900-series: for machines with 35 to 65hp. 7/8" diameter. Sold individually.
900 Series Greenteeth Specifications | Wrench Size (in) | Nut Size (in) | Carbide (in) | Torque (ft. lbs.) |
|
---|
WARNING: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. The following chemicals have been identified by the State of California to cause cancer. Cobalt CAS ID #: 7440-48-4, Nickel CAS ID #: 7440-02-0.
900-series: for machines with 35 to 65hp. Remember to order bolts below. Sold individually.
WARNING: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. The following chemicals have been identified by the State of California to cause cancer. Cobalt CAS ID #: 7440-48-4, Nickel CAS ID #: 7440-02-0.
Bolts for use with LoPro pockets. Sold individually.
This anti-seize compound also lubricates nuts and bolts to help prevent rust and corrosion and seizing up. We recommend using Green-Seize anti-seize when you install your Greenteeth® pockets. 8oz or 16 oz brush-top cans.
Standard 6" & 8” green wheels for sharpening carbide tips on stump grinder teeth. Pearl brand bench grinding wheels are designed for use on work benches or floor standing machines. Wheels are not affected by water, oils or acids. Each wheel is balanced and ring tested. One size wheel can fit several different machines using the included bushing set. Use Green Silicon Carbide bench grinding wheels for fast burr free grinding of tungsten carbide tipped tools, ferrous and non-ferrous metals.
6” Wheel x 3/4” x 1” - C80 Grit - MAX RPM: 4,140
8” Wheel x 1” x 1” C120 Grit - MAX RPM: 3,600
Warning! Carbide dust is harmful if inhaled. A respirator must be worn while using the Green wheel.
This is an oversized item and excluded from free shipping. It ships for $45 in the continental US. (Other areas, ask for a shipping quote.)
The Stein Modular Guarding System MKIII is designed to help reduce the risk of flying debris and help protect property from damage. This system has been redesigned to be easily broken down and set up, and is easy to ship - this item now is eligible for the free shipping offer, and now proudly made in the USA.
The panel is easy to assemble with no tools - two upright and two cross bars push together to build the frame for the Mark III Guarding System. The heavy-duty mesh cover slides over the frame in one piece and joins together at the base with two press studs and Velcro.
The Mark III Modular Guarding System can be customized with hazard striping and / or a "stump grinding" notice, and expanded with additional panels (sold separately).
3-panel, modular guarding system. Each panel measures 40.5" x 44.5" and weighs 8.4 lb, for a total weight of 25 lb. Protects property and workers from possible injury due to flying debris. Made in the U.S.A.