Here you will find our growing selection of chainsaw tools and accessories. You'll find round and flat files, chain breakers, and electric chain sharpeners, as well as grease guns and wrenches. This selection of chainsaw maintenance tools will keep growing as we develop our stock of OREGON® saw chain and bars.
The Accu-Stick Pro is an adjustable, telescoping tool which makes it easy to quickly cut firewood to the exact desired length every time. Simply adjust the Accu-Stick to the mark for the length of firewood you want to cut, (from 14" to 26") and attach the magnetic end to your saw bar. The Accu-stick is now a guide for cutting perfect firewood rounds every time, with no pre-measuring or marking - a great time saver!
Please refer to the product instructions to view proper safe placement of accustick magnetic base "behind and in the valley of the bucking spikes teeth". Do not try to position or move / remove accustick tool while the chain saw is running as this can cause serious bodily injury and or damage to the chain saw or tool.
The "Ott Ultra-Thin Chain Bar Tool" has both common sizes that takes care of both larger and smaller saws. The tool can be hung on a using the hole at the end of the tool, or attached to the saw bar thanks tot he built-in magnet. Features a machined aluminum, both, stainless-steel retractable screwdriver, and pivoting socket screw from Titanium. All this makes for an extremely durable, light weight, all in one, long lasting tool.
These magnetic saw bar nuts can be used on your saw to allow your Ultra-Thin Chainsaw Tool to lay more paralell and with a better fit when attached to your saw with the built-in magnets. 13mm and 19mm sizes availab.e
Remember to get the right bit for your chain!
The Timberline Chainsaw sharpener is great tool to get professional sharpening results on your saw chain, and keep your saws cutting at peak performance. The Timberline sharpening tool sharpens every tooth evenly, so you get identical height, length, and angle for top cutting results. The Timberline tool is a solid platform for sharpening each tooth with the carbide cutter which is operated by a hand crank.
This tool is a great way to increase the performance of your saw and increase safety at the same time. The Timberline Chainsaw Sharpener makes getting sharp chains easy for all levels of users.
Rated: Excellent Review by: Phill
“Wish I had this 30 years ago. It is rock solid, easy to set up on different saws and chains, and does an impressively accurate, uniform, razor-sharp job. The NiceGuyDave video convinced me to try it - thanks for posting that, it covers pretty much everything you need to know to get started.
I am tempted to get a spare crank handle so I can leave both carbides permanently mounted and not have to take any allen wrenches or other small parts out in the woods. I will probably still touch up chains with the file while in the middle of a job but this is my go-to for bringing chains back up to factory sharp. Will be interested to see how long the carbides last.
When I'm finally too old to run a chainsaw, this will go to my grandson. He wiill probably pass it on as well. It is rock solid.”
Rated: Excellent Review by: Resort Owner
“I bought this sharpener from WesSpur, I got it in about 5 days, I have a new stihl ms 250 with a .325 pitch chain. I used it for the first time today. Once set up it works like a dream. I have cut a couple of cords of wood with new chain. Starting to dull from dirt on wood, and occasionally touching the ground. The Timberline sharpener is a great product. I am not that good with a file. Have used grinder in the past, but heats up chain to easy. Kind of expensive, but so was the Stihl. Get what you pay for, as long as China did not make it. ”
Rated: Excellent Review by: CW
“I've traditionally hand filed chains and having them professionally sharpened in-between when time permitted. I wanted to try this out because I figure after 10 or so sharpenings it would pay for itself. I've tried several hand-filing guides and though this product is more expensive than a file sharpener and guide, it is well worth it. The sharpener is very high quality construction and comes with a nice case. I was able to bring back a poorly sharpened and dull chain within about 15 minutes after I got it set up with no training besides reading the instructions. Just set it up right and rip through sharpening! set it for your "shortest" link and quickly even them all out (tapered bit allows aggressive material removal). An A+ and I don't usually review things. ”
Employee Review by: Niceguydave
“I tested the new saw sharpening jig from Timberline. Let me start off with saying I was highly skeptical of the device. I am biased from over 25 years of cutting, and hand filing with a round file is second nature. My Silvey turns chain into a extremely hungry tree-eating device.”
“Out of the box, the Timberline is extremely well built from anodized aluminum block, with a nice tooth adjustment screw and leveling screws. Setup is pretty easy if one follows the instructions. I used it on .325 pitch chain. The carbide cutter runs through preset angle guides (30 degrees top plate) and after it is setup on the bar you just move the teeth into the stop and turn the carbide. It gets the top plate and side plates perfect.”
“I ran the saw through cured Doug fir, Cherry and Alder, and it cut just fine. The big benefit of this device is it allows those who aren't good at hand-filing a chain to have razor sharp chain quite easily, which translates to less fatigue, longer saw life and increased production. A great tool for both the occasional and pro user.”
WesSpur stocks 12 packs of chainsaw files to keep your saw chainsaw chains sharp and your cutting efficient.
Take the guess work out of sharpening your chain with these file guides. The guide keeps the file at the correct angle and depth. This is the perfect tool for teaching beginners how to sharpen chain by hand.
Keep your chain rakers the correct height with these OREGON® flat files.
High-performance professional user accessories from OREGON® to keep your chain saw cutting at maximum efficiency. Kit contains OREGON® .025 depth gauge, and flat file. File made in Switzerland, depth gauge made in the U.S.A.
OREGON® chainsaw chain sharpening kits contain high-end files to keep your saw chain cutting at maximum efficiency. Each kit contains a flat file, round file and filing guide, two handles, and depth gauge. Files made in Switzerland, all other components made in the U.S.A.
Is your saw cutting in an arc? Repair minor damage to your bar rails with this bar rail dresser. Can be used on both the top and outer edges to make rails square again. Included flat files are replaceable.
This extra large saw dog is designed to replace the small dog that comes stock on a Stihl MS200T. Whereas the small stock dog is too short to bite on logs larger than 12” in diameter, this one will.
Pack of 6 replacement flat files for the bar rail dresser.
Stump vise hammers into a stump for on-the-job chainsaw chain sharpening. Screw-lock secures blade in place while you go to work with the saw file.
Newest Version of the TopSaw Tool, now 12 tools in 1. New improved sheath. Contains 19mm x 10mm socket (reversible), 21mm x 16mm socket (reversible), 13mm socket, T27 torx, T25 torx, 4mm hex ball drive, large screw driver, small screw driver, bar groove clean out tool and when folded it can be used as a file handle.
This must-have tool makes it easy for you to replace your chain saw's guide bar or chain. The only tool you need to adjust your chain tension. 3 sizes to fit most popular chain saws. Combines screwdriver and wrench in one tool.
This professional grade bench mount rivet spinner is the basic tool for joining chain loops. Produces consistent rivet spins and minimizes risk of chain breakage. Spins all chain rivets up to .404” pitch.
Drives out rivets from 1/4”-, .325”-, 3/8”-, .404”-, and 1/2”-pitch chains.
Designed for high-volume chain sharpening, this machine has a powerful 0.38 hp electric motor, easy to use controls, a built-in light, a wheel-dressing brick, and a template for pitch, depth-gauge setting, and wheel contour. Comes with 3 wheels for round ground chain pitches of 1/4”, .325”, .404”, 1/2”, and 3/4”.
#4-1/2 chainsaw starter rope, sold in 100' spools.
No-Spill gasoline can has special nozzle to give you no-spill control over the flow of fuel. Professional Grade, Stainless Steel Filter Screen, 3 Year Warranty. Made in the U.S.A. Spill proof system with 2.5 GPM flow rate. 3 sizes available.
Replacement cap and nozzle for all sizes of the No-Spill Gas Cans.