Kevlar Chainsaw Chaps & Protective Clothing

If you are running a chainsaw, you should have the best protection available. Kevlar chainsaw chaps offer the most saw-stopping power. The ANSI Z133.2012 Safety Requirements for Arboricultural Operations require chainsaw protective leg protection when running a chainsaw on the ground. A good pair of chainsaw chaps can mean the difference between a stopped saw chain and a serious or even career-ending injury.

6-Ply Kevlar Chainsaw Chaps

Regular - 32” Overall Length

Long - 36” Overall Length

X-Long - 40” Overall Length

Lightweight Labonville Kevlar chainsaw chaps have exceptional tear & snag resistance, thanks to Cordura Plus construction. These Kevlar chaps are 3 times more durable than polyester, 7 times more durable than nylon, and 14 times more durable than cotton. Extra-large, 1440 denier Kevlar strands provide the saw-stopping power in these chainsaw chaps.

For best function, chaps should be kept clean, which is why the chaps are built to repel water, grease, and oil. These chaps are reversible as well, so if one side becomes dirty they can be reversed and worn longer in between washings. For the proper fit measure the wearer from belt to top of foot to get “overall length.” Chaps are designed to fit to mid-shin. Made in the U.S.A.

These chainsaw chaps meet all OSHA requirements and are UL CLASS A classified. Chainsaw protective chaps and pants in accordance with ASTM F1897-08 standard specification for leg protection for chainsaw users.

Link to Labonville Kevlar Chainsaw Chaps Field Test Video on Youtube: Kevlar Chaps Field Test

Full-Wrap 6-Ply Kevlar Chainsaw Chaps

Regular - 32” Overall Length

Long - 36” Overall Length

X-Long - 40” Overall Length

Full-wrap 6-ply chainsaw chaps feature full left sides with the additional protection of an extra flap that wraps around the back of the leg.

For best function, chaps should be kept clean, which is why the chaps are built to repel water, grease, and oil. These chainsaw chaps are reversible as well, so if one side becomes dirty they can be reversed and worn longer in between washings. For the proper fit measure the wearer from belt to top of foot to get “overall length.” Chaps are designed to fit to mid-shin. Made in the U.S.A.

Link to Labonville Kevlar Chainsaw Chaps Field Test Video on Youtube: Kevlar Chaps Field Test

More Info

Gladiator Chainsaw Pants

# saf420

Finally! Chainsaw protective pants which fit comfortably and don't get in the way of your work while they protect. Gladiator pants are super tough. The waterproof fabric offers extreme tear & wear-resistance for the extreme conditions of your job site. Stretch-AIR technology provides perfect mobility and breathability while the functional lining gives great wearing comfort. High cut protection and comfort without the bulk!

Sizing Guidelines:
Waist Sizes: SM 31", MD 34", LG 37", XL 39", XXL 43"
Length: Small 30" inseam; Regular 32" inseam; Long 34.25" inseam

More information and add-on suspenders: More Info

Lumberjack Chainsaw Safety Set

This hard hat, ear muff and shield combination contains standard hard hat, ear muffs, visor and sealer, and a neck flap to keep chips and rain from getting down your collar. Does not contain impact-resistant eyewear.

Arborist/Logger First Aid Kit

This Arborist/ Logger's first aid kit has everything needed for a job site kit. Includes wire splint, adhesive tape, rescue blanket, scissors, forceps, CPR barrier, ace bandages, large adhesive bandages, 4x4 gauze pads, 2 inch x 6 yd. gauze roll, 2 x triangular bandages, antiseptic towelettes, and more. Click the picture to view contents.

Bloodstopper Kit

Kit with Loop

Kit with Snap

Climber's first aid compress which can be used to help stop the flow of blood if a serious wound occurs while climbing, allowing the climber to reach the ground and medical help. Velcro-close pouch is easy to open but stays shut when not needed. Choice of loop or snap attachment for saddle.